三维贴体坐标系下燃烧室热态流场的大涡模拟

大涡模拟三维贴体坐标系下环形燃烧室火焰简热态紊流瞬态流场。利用椭圆方程方法生成三维贴体网格，计算中采用k方程亚网格尺度模型估算亚网格紊流粘性；亚网格EBU燃烧模型估算化学反应速率；热通量辐射模型估算辐射通量。并在非交错网格系下采用sIMPLE算法和混合差分格式求解离散方程，利用壁面函数处理固壁边界条件。计算结果与实验结果的比较表明，采用大涡模拟方法能更真实反映环形燃烧室火焰简内紊流化学反应流气流结构和燃烧过程。     

Experimental Study on Effects of Fuel Injection on Scramjet Combustor Performance

In order to investigate the effects of fuel injection distribution on the scramjet combustor performance, there are conducted three sets of test on a hydrocarbon fueled direct-connect scramjet test facility. The results of Test A, whose fuel injection is carried out with injectors located on the top-wall and the bottom-wall, show that the fuel injection with an appropriate close-front and centralized distribution would be of much help to optimize combustor performances. The results of Test B, whose fuel injection is performed at the optimal injection locations found in Test A, with a given equivalence ratio and different injection proportions for each injector, show that this injection mode is of little benefit to improve combustor performances. The results of Test C with a circumferential fuel injection distribution displaies the possibility of ameliorating combustor performance. By analyzing the effects of injection location parameters on combustor performances on the base of the data of Test C, it is clear that the injector location has strong coupled influences on combus- tor performances. In addition, an inner-force synthesis specific impulse is used to reduce the errors caused by the disturbance of fuel supply and working state of air heater while assessing combustor performances.     

光束扩展、光船倾斜和漂移对光船自由飞行演示的影响

为了研究光船的地面演示自由飞行试验中激光束扩展、光船相对激光束的倾斜和漂移等因素对光船飞行高度的影响,采用了理论分析和数值模拟相结合的方法。分析表明,激光束的扩展将导致光船接收激光功率的减小,光船相对于光束的倾斜会影响激光的聚焦和光船推力方向,但光船的倾斜力矩不会在飞行过程中累积而使光船倾斜过大,而光船的漂移则会改变光船推力以及侧力的大小。光船飞行数值模拟仿真表明,在横向偏移扰动下,光船在没有达到最大可能高度之前将脱离光束从而失去动力。研究结果显示,减小光船的横向偏移和激光束的发散角可以有效提高光船垂直上升的高度。     

铁磁性纳米线阵列磁滞回线的模拟

讨论了铁磁性纳米线磁滞回线的特点及其影响因素，使用蒙特卡洛方法模拟了在周期性边界条件下的磁性纳米线阵列的磁滞回线，利用模拟的方法研究了不同长度的混乱度对平均长度相同的铁磁性纳米线阵列磁滞回线的影响。研究发现，铁磁性纳米线阵列的长度的混乱度越高，其磁滞回线的饱和磁场强度随着升高．剩余磁化强度则有所降低。     

IP多播技术的无根多播实现

随着互联网的发展,IP多播技术在需要大量带宽的多媒体应用中的地位日益重要.对IP多播技术进行全面介绍,分析其原理及应用,并着重探讨在灵活性、互动性强的多点对多点通信应用中,采用无根多播的方法来实现的优势和关键.     

Microstructure and Martensitic Transformation Behaviors of Explosively Welded NiTi/NiTi Laminates

The study is a first attempt to prepare bulk NiTi/NiTi shape memory alloy (SMA) laminates with a macroscopic heterogeneous composition by explosive welding and investigate their microstructures and martensitic transformation behaviors. After explosive weld- ing, a perfect interfacial bonding between the two components and a reversible martensitic transformation are realized in the tandem. Results show achievement of a fine granular structure and the maximum value of microhardness near the welding interface because of the excessive cold plastic deformation and the high impact velocity during the explosive welding. Meanwhile, the effects of aging on the transformation of the welded tandem are investigated by differential scanning calorimeter (DSC) and subject to discussion. The trans- formation temperatures of NiTi/NiTi SMAs increase with the rise of the aging temperature. The experimental results indicate the shape memory properties of NiTi/NiTi SMA fabricated by explosive welding can be improved by optimizing the aging technology.     

中国目前市场环境下管理者收购研究

管理者收购作为杠杆收购的一种形式，已成为经济领域的一个热点问题。通过分析管理者收购的具体含义以及管理者收购在我国实施的情况，得出管理者收购在我国是可行的，并对我国企业改革具有借鉴意义，同时指出在中国目前的市场环境下实施所面临的一些问题。     

基于双口RAM的智能429总线接口卡设计

利用89C52单片机和双口RAM IDT7132设计了智能ARINC429总线接口卡。采用单片机使接口卡具有了自动数据处理能力，实现了智能化；采取双口RAM作为单片机和ISA总线数据交互媒介，提高了传输速率。讨论了双口RAM的地址空间分配和数据共享冲突仲裁问题，对接口卡的软件设计做了介绍。应用表明，所设计的接口卡具有传输速率高、可靠性好等优点。     

超跨音对转涡轮试验台

超跨音对转涡轮试验台由进气涡壳、轴流式试验段 ( 2个转子 )、排气涡壳、2个减速箱、2个电涡流测功器、燃烧加热器、滑油系统等组成。它可以允许轴流式涡轮高低压转子对转或同向旋转 ,对有或无导叶涡轮进行气动方面的研究工作。采用不接触测量 ,如 PIV激光测速等可视化测量手段 ,便于对级间流场的分析研究。     

LRE模型燃烧室燃烧过程数值模拟

建立了任意斜交曲线坐标系下液体火箭发动机（ＬＲＥ）内部工作过程的气液两相湍流化学反应流模型。应用该模型对气氢液氧模型燃烧室内部燃烧过程进行了数值模拟，得到了全流场的速度分布图形、燃气组分等值线、流场等温线、流场等压线、流场等马赫数线、壁面温度与径向平均温度曲线和燃烧效率曲线。计算结果表明：用数值模拟方法分析ＬＲＥ内部工作过程是可行的。